Seller Seller Ratings Info Go to Store Trusted Seller In Stock New Go to Store Trusted Seller In Stock New Go to Store Trusted Seller In Stock New Go to Store Trusted Seller In Stock New Go to Store Trusted Seller In Stock New Go to Store

Note: Your submitted review is subject to the license terms set out in our Terms of Use. By submitting your review, you acknowledge that you have the authority to do so and that your review does not violate another party's copyright or intellectual property rights

Product Details
Name Maytag 904969P - PGC2TA100CVC1 - 80%, M1200, Two Stage, Variable Speed, Upflow/Horizontal, High Efficiency, Gas Furnace
Brand Maytag
Item Number PGC2TA100CVC1
Manufacturer Product Number 904969P
SKU - PIM Number 1383140699119
ERP Number 215162
Unit of Measure EACH
Weight 135.0 Pound (lb.)
Length 30.0 Inches (in)
Width 23.0 Inches (in)
Height 36.0 Inches (in)
Hazardous Material No
EPA Cert Required No
Country of Origin USA
Equipment Type Furnace
AFUE 80.0%
CFM 2000
Heating Capacity 52000-80000
Air Flow Upflow / Horizontal
BTU Input 65000-100000
BTU Output 52000-80000
Voltage 115 VAC
Full Load Amps 8.7
Phase Single
Cycle/Hertz 50
Cycle/Hertz 60
Minimum Circuit Amps 10
Maximum Fuse Size 15
Blower Motor HP 3/4 HP
Rated Load Amps 8.7
Ignition Type Electronic
Certifications AHRI, Nate, CSA
Color White
Fuel Type Natural Gas
Gas Connection 1/2" [12.7 mm] N.P.T.
Thermal Efficiency 80%
Warranty Offered All Parts - 12 Years, 12 Year Dependability Promise to replace the unit if heat exchanger fails. Product registraion required for both within a limited period of time after installation.
Energy Star Rated No
ETL Certified No
LEED Certified No
UL Listed No
UL Recognized No
Motor HP 3/4 HP
Stages Heat 2
Tonnage 2
Motor Type BLDC
GEM - Case Quantity
Two Stage, Fixed Speed, High Efficiency, Upflow/Horizontal and Downflow Gas Furnaces (80+ AFUE Input 60,000-140,000 BTUH). The high efficiency gas furnace may be installed free standing in a utility room, basement, or enclosed in an alcove or closet. The rounded corner jacket provides a pleasing "appliance appearance." Design certified by CSA for Canada and the United States.

Features and Benefits:
  • iSEER: Energy efficient brushless DC (ECM) motor gives up to 1 SEER point efficiency gain in cooling.
  • 100% fired and tested: All units and each component are tested on the manufacturing line.
  • Best packaging in the industry: Unique corner post design assures product will arrive to the homeowner dent free.
  • Low Boy Height: Easy to apply in low ceiling applications, works well with taller high SEER coils, easier to handle and install.
  • Tubular primary heat exchanger: Heavy gauge aluminized steel heat exchanger assures a long life.
  • 30 second blower delay at start-up: Assures a warm duct temperature at furnace start-up. Adjustable blower off settings (60, 90, 120 and 180 seconds).
  • 30 second post purge: Increases life of heat exchanger.
  • Hot surface igniter: Innovative application of an appliance type igniter with a 20 year history of reliability. Utilizes proven Smart Starta┬« technology.
  • Color coded wire harness: Designed to fit the components, all with quick-connect fittings for ease of service and replacement.
  • High static blowers: All models equipped with high static blowers.
  • 90 second cooling cycle blower-off delay (TDR): Increases cooling performance when matched with a Nortek coil.
  • Flexible category I venting system: May be vented with dedicated venting system or common vented with other category one appliances.
  • Variable Speed Blower Kit: Upgradable to full variable speed with kit.
  • LP convertible: Simple burner orifice and regulator spring change for ease of convertibility.
  • Diagnostic lights for easy troubleshooting without counting flashes: Dedicated light for flame signal strength and 2 lights in combination to indicate all other fault codes with easy to recognize states without counting flashes.
  • Integrated control board: Incorporates connections for electronic air cleaner and humidifier.
  • Two piece door design: Enhances furnace appearance and uses captured screws to prevent loosing door screws.
  • Blower Compartment: Insulated for ultra quiet operation.
  • 2 Stage Inducer: Optimizes efficiency on first stage heat and reduces sound levels.